Couldn't load pickup availability
Product Title: 3-Stage Under-Sink Direct Connect Water Filtration System – 0.5 Micron Carbon Block, 2 GPM Flow Rate, Eco-Friendly Inner Core Replacement, Brass Fittings
Product Description:
Filtered water from your existing tap. 3-minute installation. No extra tap needed.
This under-sink water filtration system connects directly to your existing cold water line and kitchen tap — no dedicated faucet, no drilling, no electricity, no drain line. In about 3 minutes, you'll have a 3-stage, 0.5-micron filtration system running at a fast 2 GPM flow rate, delivering cleaner, better-tasting water every time you turn the tap. Fill an 11 oz glass in just 3 seconds.
3-Stage, 5-Layer Filtration:
Stage 1 – PP10 Sediment Pre-Filter (3–6 Months): A polypropylene sediment filter that catches larger particles like sand, silt, rust, and dirt. It protects the downstream carbon filters and extends the life of the entire system.
Stage 2 – CB10 Carbon Block (CTO) (12–18 Months): A compressed carbon block filter that adsorbs chlorine, chloramine, volatile organic compounds (VOCs), and unpleasant tastes and odours. This stage handles the bulk of chemical contaminant reduction.
Stage 3 – CL10 Carbon Block (CTO, 0.5 Micron) (12–18 Months): A fine 0.5-micron carbon block that provides the final polishing stage — reducing lead, heavy metals, sediment, chlorine, VOCs, and bad taste to deliver water that's clean, crisp, and safe for drinking and cooking. Beneficial minerals are retained.
Direct Connect — No Extra Tap Required: Unlike most under-sink systems that require drilling a hole in your worktop for a dedicated faucet, this system connects directly in-line between your cold water supply and your existing kitchen tap. That means filtered water comes straight from the tap you already use — ideal for renters, granite worktops, and anyone who wants a clean installation with no modifications.
2 GPM Fast Flow — No Waiting: At over 2 gallons per minute at 60 PSI, this system delivers filtered water at virtually the same speed as your unfiltered tap. There's no noticeable pressure drop — fill pots, glasses, and water bottles at full speed.
Eco-Friendly Inner Core Replacement: When it's time to replace a filter, you only swap the inner cartridge core — not the entire plastic housing. Just twist, pull out the old core, and click in the new one. The outer housing is reusable and lasts for years. This means less plastic waste per replacement compared to brands that discard the entire cartridge housing.
Automatic Water Shut-Off: The built-in auto shut-off design means you don't need to turn off your water supply before replacing a filter. Simply twist the cartridge out and the water stops automatically — no mess, no tools, no plumber.
Durable Brass Connections: The inlet fitting uses solid brass — not the cheap plastic connectors found on many competing systems. Brass resists corrosion, handles pressure changes, and ensures a leak-free, long-lasting connection.
Key Features:
Filter Replacement Schedule:
Actual filter life depends on water quality and daily usage.
What's in the Box: 3-stage filter unit (PP10 + CB10 + CL10 cartridges pre-installed) · Braided stainless steel inlet hose · Braided stainless steel outlet hose · Brass connection fittings · User manual
Installation: Connects to the 3/8" cold water supply line under your kitchen sink. Simply disconnect your existing tap's cold water hose, connect the filter system in-line using the provided braided hoses, and reconnect to the tap. No drilling, no extra faucet, no power outlet needed. The entire installation takes approximately 3 minutes.
Note: For use with cold municipally treated water only. Does not reduce TDS. Beneficial minerals are retained.
Cleaner water from the tap you already have. In 3 minutes.
Most families assume their tap water is safe because it looks clear. But safe by regulation and actually clean are two very different standards, and the gap between them is wider than you think.
This is not about buying a filter. It is about removing a problem you have been absorbing every single day, and noticing the difference within the first week.
Most people do not think about it because the cost is spread across dozens of small purchases. But add it up over a year and the number is hard to ignore.
| Water Source | Annual Cost | Quality |
|---|---|---|
| Bottled Water (family of 4) | €1,200 – €2,400/yr | Inconsistent, plastic leaching |
| Basic Pitcher Filter | €80 – €180/yr | Removes chlorine taste only |
| Water Delivery Service | €600 – €1,000/yr | Decent, but inconvenient |
| Hydrion Filtration System | €0.08/litre (first year incl.) | 99.9% contaminant removal |
Based on average European household consumption of 8L per day. Filter replacement costs included.
One path changes nothing. The other removes a problem you will wish you had dealt with sooner.
Everything you need is in the box. No plumber required. Most people are up and running in 20 to 30 minutes with the included quick-connect fittings.
Run the system for 15 minutes to prime the filters. Use the included TDS meter or the built-in display to see your water quality drop in real time.
Turn on the tap and it is clean. Filters last 6 to 12 months depending on your model. The system tells you when to swap, takes 3 seconds.
One purchase. Years of clean water. The math works, the science works, and the guarantee means you have nothing to lose.
